Systems FAQ For FreeBSD Last Modified: Systems-1.1.FAQ,v 1.1 1995/01/03 15:48:50 gclarkii Exp This FAQ is a list of systems that people have sent to the FAQ maintnance person for inclusion. If you have a system you would like to be included please send it to FreeBSD-FAQ@freefall.cdrom.com. Disclaimer: This document is composed of systems that people have sent to the FAQ maintnance person. It is the not to be taken as an endorsement for any system or manufacture. 1. 386DX/20 real AMI, ISA Oak SVGA (no X) 8MB Adaptec 1542B, WD1007V ESDI Wren VI and Miniscribe 660MB 20Mbit/sec ESDI WD 8013EBT 2. 486DX/25 clone, AMI BIOS, ISA Orchid PCIII gas plasma (yes, VGA16) 8MB Adaptec 1542B Micropolis 1684 SCSI SMC 8013EEWC 3. ??? OPTI chipset AMI BIOS 486/50 ISA ISA ET4000 w/ X11 (not so slow) 16 Mb - 48 Mb swap ISA aha1542 B ISA no-name IDE w/ floppies FUJITSU M2623S-512 405MB set to SCSI2 SEAGATE ST3283N 237MB SCSI2 SANYO CRD-400I SCSI2 cdromcdrom 4. Lipizzan LDO-1 486DX-33 motherboard Orchid ProIIs (1M) video 8 MB memory Generic 2S/1P/2FD/IDE controller: Maxtor 7213 AT WDC AC2420H PAS-16 + Sony CDU31A CD drive (Fusion 16 package). *** The CD drive does not currently work with FreeBSD. 5. Asus VL/ISA-486SV2 (ISA-VLB as you can see) Orchid Fahrenheit 1280+ VLB (yes) 20MB Some no-name IDE VLB controller Conner CP30504 (I think....the 540MB IDE one) Zoltrix 14.4/14.4 Fax/Modem on tty01 Intel 486DX2/66 CPU + fan Conner CP30104 (120MB....for DOS) 6. AIR 486El (running with AMD486/40) ATI Graphics Ultra Pro running XFree862.1 16M Adaptec 1742 Micropolis 2217 Wangtec 6130FS DAT drive (Some problems) 7. Compudyne 486 DX2/66 ATI Local Bus GUP w/ 2megs 16 Megs Memory 504 IDE Hard Drive Colorado 250 meg QIC-80 tape drive 8. American Megatrends Enterprise III, 486DX2-66 ATI VLB Mach 32 (with X) 16 meg Adaptec 1742 EISA SCSI with floppy Toshiba 5030 SCSI-II Toshiba 5157 SCSI-II SMC Elite16T ISA Ethernet (ISA) 9. American Megatrends Enterprise III, 486DX ATI VLB Mach 32 (with X) 32 meg Adaptec 1742 EISA SCSI with floppy Maxtor P0-12S SCSI Digital DSP5200S SCSI-II Pro Audio Spectrum 16 Wonder Board, 4 serial (16550), 3 parallel, each on a different interrupt 10. NoName 486DX/33, Intel Chipset, EISA-Bus ATI Graphics Ultra Pro EISA, 17" Nanao (Eizo) F550-i Monitor Running the Mach32 X-Server XFree86-2.1.1 with fonts created from source. 16 MB RAM (planning to add another 8 MB). AHA1742A Conner CP3100 Fujitsu 520 MB Archive 525MB streamer tape. Gravis UltraSound - works for mod-files. 11. ASUS SP3 PCI Board with i486 DX/2 66 MHz ISA ET4000 (I already tested a S3 805 PCI card successfully) Adaptec 1542B Toshiba XM3301TA CD-Rom CDC Harddisk, 572 MB (I don't know the exact specs) 12. Mylex MAE486/33 EISA Motherboard 16MB memory Actix GE32+ S3 801 gfx Adaptec 1742A controller Seagate ST3160 drive Seagate ST5120 drive Archive Viper 150MB tape Roland SCC-1 sound card Gravis Ultrasound card Longshine SMC/Novell compatable ethernet card 13. Model: DECpc LPv 466d2 Config: Local (Motherboard) S3 801 gfx, IDE controller, PS/2 mouse, 12MB memory 14. ??? 486/DX266 EISA/VLB Motherboard 16MB memory #9 GXE L12 VLB 3MB graphics card Bt445S VLB disk controller DEC DSP3105S drive MAXSTOR P-17S drive Tandberg 525MB tape drive Toshiba XM3301 CDROM Soundblaster 2.0 Longshine SMC/Novell compatable ethernet card 15. M407 PC chips with 33Mhz 486. Had to disable external cache due to DMA problems. Board uses write-through cache unless a second chip is added to allow write-back.write-back. Orchid ProDesigner II (yes) 16Mb IDE Maxtor 7213 AT and Maxtor 7120 AT 2 BICC Isolans (Lance based cards) 16. Gigabyte EISA/VLB motherboard with SIS chipset, AMI bios, 32 MB ram Adaptec 1742 SCSI 2 controller with floppy controller enabled Spea/V7 Mirage - S3/805 based localbus graphics card with 1 MB d-ram no name wd8013 compatible ethernet card Gravis Ultrasound card with 1 MB ram 2 Fujitsu 400 MB and 1 Seagate 500 MB SCSI 2 harddisks 5 1/4 + 3 1/2 inch floppy drives Tandberg TDC3600 60 MB + Tandberg TDC3800 525 MB Streamer (these don't work quite properly yet) 17. i486DX33, 16 Mb RAM, 256 Kb external cache, VLB board no-name IDE/floppy controller Western Digital Caviar 2340 (325 Mb) Kalok KL-343 (40 Mb) Chips & Technologies 451 SuperVGA card (800x600, 16 colours, 256Kb) 18. no name EISA i486DX/33 board, 16 MB RAM Adaptec AHA-1540*A* (not knowing if the current -current might cause problems, my kernel is from end of march) Maxtor MXT-1240S, 1.2Gig very fast SCSI disk Seagate ST-1144A, just to boot off the beast (also has a messdos partition yet) Archive Viper 150 tape; has a firmware braindeadness when appending files, works very well otherwise ELSA Winner 1000 ISA/EISA, 1MB VRAM, S3 86C928 (unfortunately, D-step chip) Nokia 447-B 17in monitor, running ~ 1100x800 resolution, very nice true `Mouse Systems' optical mouse, fine thing! sometimes a Toshiba XM-3301 CDROM, rather old, but solid & reliable 19. older south-east Asia made notebook, i386SX/16, 5 MB RAM (where the 384 k hole can be re-mapped, so all the 5 MB are useable) Seagate ST-9145AG, 120 MB 2.5in IDE disk, very low power consumption, but rather slow transfer rate, only about 350 K/s, so paging is a mess 640x480 LCD, ~ 16 gray tones distinguishable, Cirrus Logic CL-GD610/620 chipset; runs generic VGA-Mono and VGA-16 XFree86[tm] servers; needs some hacks in rc.local to give full contrast when running with the pcvt display driver (due to their different default attribute handling) 20. Data General Dasher 386sx/16, 8 MB RAM Adaptec AHA-1542B Seagate ST-3655N, 525 MB SCSI disk Conner CP-3044, 40 MB IDE disk has been working with a Western Digital WD-1007V ESDI controller (on secondary wdc address), and a Micropolis 1664-7 330 MB ESDI disk - but this beast was terribly slow, loud (& unreliable) and therefore had to go ET-3000 based 512 K VGA, slow (wrt. XFree86), but reliable 3Com 3C503 Ethernet adaptor, suffers from the `do not nfs mount with too large packets' problem, but works well otherwise `Mouse Systems' optical mouse Toshiba XM-3301 CDROM already ran with a Micropolis 1664-3 330 MB SCSI disk (same drive as above, but different interface) already ran with an IBM 2Gig SCSI disk (don't remember the type) 21. Mylex MNA 486/33 EISA Motherboard 16Mb of Memory 1.2 GB Toshiba 538 SCSI disk 400Mb IBM SCSI disk 150/250Mb Tandberg SCSI tape drive Toshiba 3401 SCSI CD-ROM Tseng 4000 Video Controller Logitech Bus Mouse Mediavision Pro Audio Stereo Sound Card Adaptech 1742A SCSI controller WD8013EBT Ethernet Card 22. 386DX-40 w/Cyrix math co-processor ET-4000 running X 16MB IDE 540MB Western Digital WD8003EP